Asante Technologies Intrachassis 9000 - Manual (Page 68)

Basic Configuration
Page 3-26
Advanced 1000BaseX Port Configuration
If you are in the Basic Port Configuration menu for a 1000BaseX port and type
a the menu shown in Figure 3-11.
Figure 3-11 Advanced Port Configuration menu - 1000BaseX port
To change the maximum broadcast or multicast rate, or to enable or disable
flow control, or to set the default priority for a 1000BaseX port, use the
procedures in the “Advanced 10/100BaseTX Port Configuration” section.
Global Port Configuration
This menu allows you to change the configuration information for all ports
simultaneously. This feature is helpful in cases where you want the same
configuration for all ports in a module.
Type g in the Basic Port Configuration menu for either 10/100BaseTX or
1000BaseX ports to display the Global Port Configuration Menu, as shown in
Figure 3-12 and Figure 3-13.
IntraChassis 9000 Basic Port Configuration Menu Module Type: (2-GBIC)
Module: [1]
Port: [1]
Port 1 Port 2
=========== ===========
Flow Ctrl: SX-LinkUp (Forwarding) SX-LinkDown
Priority: 1 1
Max. Broadcast Rate: N/A
Max. Multicast Rate: N/A
802.3x Flow Control: Enabled
Port Default Priority: 1
h Help for legends
r Set Max. Broadcast/Multicast Rate
f Toggle 802.3x Flow Control Enable/Disable
i Set Port Default Priority
q Return to Previous Menu
Command>
Select module Next module Prev module Select port Next port Prev port
GLXY9.book Page 26 Thursday, February 17, 2000 3:04 PM