Asante Technologies Intrachassis 9000 - Manual (Page 18)

Introduction
Page 1-10
Defaults and Specifications
The IntraChassis 9000 is shipped with the following factory default settings
and specifications:
Table 1-3 Defaults and Specifications
Configuration Default Setting
Backplane Speed 32Gbps.
Switching Method Store-and-forward
Forwarding Rates:
(64 byte packets) Switched 10Mbps = 14,880 pps
Switched 100Mbps = 148,810 pps
Switched 1000Mbps = 1,488,100 pps
Buffer Size 4MB
MAC Address Table 8K
Full-Duplex Standards based Auto-negotiation enabled
VLAN 64 port based VLANs, GVRP support, 802.1Q VLAN Tagging
Spanning Tree Protocol 802.1D, enabled
Flood Rate Limiting Broadcast traffic
Priority 802.1Q, 8 levels mapped to 4 Queues
RMON Groups 1-3, 9
SNMP MIB-II, Bridge MIB, RMON MIB, Asanté private MIBs
Console Baud Rate 9600
Password Asanté
Power Requirements 90 - 224 V, 50 - 60 Hz
Environmental Operat-
ing Range Temperature: 0° - 45° C (Storage: -40° - 85° C)
Relative Humidity: 5% - 95% non-condensing
GLXY9.book Page 10 Thursday, February 17, 2000 3:04 PM