Asante Technologies Intrachassis 9000 - Manual (Page 90)

Basic Configuration
Page 3-48
Viewing Current Operating Information
The IntraChassis 9000 switch’s current operating information can be viewed by
accessing the General Information screen within the switch’s Local
Management Interface.
To view the current operating information of the switch:
1
Access the IntraChassis 9000 Local Management Interface.
◆ Note: See Chapter 2, "Installation and Set-up" for
instructions on how to connect to the Local Manage-
ment Interface.
2
Type g in the Local Management Interface Main Menu. A
screen similar to Figure 3-29 appears.
Figure 3-29 General Information Screen
Table 3-11 describes each parameter in the General Information screen. To exit
the screen, press any key.
IntraChassis 9000 General Information
System up for: 000days, 21hrs, 45mins, 45secs
Software Version
Bank 1 Image Version/Date:
1.10/Dec 7 1999 12:14:38 (Running)
Bank 2 Image Version/Date: 1.10/Dec 7 1999 11:54:14
System Information
Prom Image Ver/Date:
1.01/Sep 8 1999 15:59:14
DRAM Size: 4MB Flash Size: 2.0MB
EEPROM Size: 32KB Console Baud Rate: 9600 bps
Administration Information
System Name:
Asante IntraStack Switch
System Location: ZLabs Head Office
System Contact: CLB
System MAC Address, IP Address, Subnet Mask and Router
MAC Address:
00:00:94:8E:F3:7B
IP Address: 192.168.54.240
Subnet Mask: 255.255.255.0
Router: 192.168.54.2
Bootstrap Configuration
Boot Load Mode:
LOCAL
Press any key to continue...
GLXY9.book Page 48 Thursday, February 17, 2000 3:04 PM