Proface FP3900 - 19 Flat Panel" - Manual (Page 67)

FP-2500/FP-2600 Series User Manual
6.1 Troubleshooting
6-2
When the screen does not display when powering up, or if the screen turns OFF by
itself, use the flowchart below to find an appropriate solution.
6.1.2 No Display
No Screen Display
YES
Does the backlight
(CCFL) light up?
YES
NO
NO
Turn OFF the power switch.
NO
YES
Is it using the correct
power voltage?
Is the power supply
cable connected properly
to the unit?
There is a problem with the FP
unit. Please contact your local
FP distributor.
Fix the power cable connection.
Chapter 3. Instal-
lation and Wiring
Connect the appropriate voltage.
Chapter 2. Specifi-
cations
Is the dip switch SW1-5
connected to the input
interface.
NO
YES
Set the Dip Switch correctly. After
changing any dip switch settings, be
sure to restart your FP unit.
4.1.1 Dip Switch
Preset Settings and
Adjustments