Proface FP3900 - 19 Flat Panel" - Manual (Page 42)

FP-2500/FP-2600 Series User Manual 3-5
3.1 Installation
Do not use too much force, since it may damage the FP
unit. A torque of only 0.5 N•m is sufficient to tighten
these screws.
4) Use a Phillips screw driver to
tighten each fastener screw and
secure the FP in place.
• Depending on the panel condition, you can improve moisture resistant effect by
increasing the number of installation fasteners.
• Installation fasteners are sold by your local FP distributor.