Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 33)

Main Screen
PLC Ladder Monitor Operation Manual 3-4
Comment
This selects the display method for I/O comments.
Touch to switch Short Comment Mode --> Compressed Comment Mode -
-> No Comment Mode in this order.
• Short comment mode
This displays up to 5 single-byte characters x 3 lines of comments.
• Compressed comment mode
This displays up to 5 single-byte characters x 3 lines of comments.
This displays the characters compressed to 1/2 vertical size.
• No comment mode
This displays no I/O comments.
• To see the full comments when only a portion is displayed, touch the
relevant comment. The number of characters displayed in the bottom left
of the screen changes depending upon the screen size.
Print This prints the Ladder Monitor screen.
Capture This captures and saves the Ladder Monitor screen to a CF Card.
Exit This closes the Ladder Monitor.
This scrolls the Ladder Monitor screen line by line.
This takes you to the previous/next page.
This shows the block program. When the block program that used the
BPRG command appears, CX-Programmer will be displayed at the same
time as a mnemonic expression.
This shows the function block.
Continued
Setting/Notated
Items
Setting/Notated Contents
I/O comments