beautypg.com

Uploading the firmware from the pc to the vsc, Uploading the firmware from the pc to the – Extron Electronics VSC 500_700_700D User Guide User Manual

Page 35

background image

Uploading the firmware from the PC to the VSC

Connect the PC to the VSC 500, 700, or 700D via the RS-232 port of the scan converter.
Start the control program (see the “

Using the Control Program

” section). Next, select

Update Firmware

from the Control Program window and follow the instructions.

Figure 29.

Update Firmware

Select

Upload Firmware File

from the following window. The uploading of the firmware

to the VSC 500, 700, or 700D will take a few minutes.

Figure 30.

Upload Firmware File

NOTE: The original factory-installed firmware is permanently available on the VSC 500,

700, or 700D. If the attempted upload of new firmware fails for any reason, the
VSC will automatically revert to the factory-installed firmware.

VSC 500/700/700D User Guide • Serial Communication

29