Extron Electronics VSC 500_700_700D User Guide - Manual (Page 33)

Figure 25. Extron Software Window
NOTE: If the installation program does not self-start, run Launch.exe from the DVD.
2. Click the Software tab.
3. Scroll to the VSC program and click Install .
4. Follow the on-screen instructions. The installation program creates a C:\Program Files\
Extron\VSC directory.
Using the Control Program
1. To run the control program, double-click on the VSC program icon in the Extron
Electronics group or folder. The Comm menu appears on the screen.
2. Click on the comm port that is connected to the RS-232 port of the VSC. The Extron
VSC Control Program window appears. The VSC 500 Control Program window and the
VSC 700D Control Program window are shown in the following figures.
Figure 26. VSC 500 Control Program Window
VSC 500/700/700D User Guide • Serial Communication 27