Extron Electronics VSC 500_700_700D User Guide - Manual (Page 17)

Menu Overview
The default menus appear on the LCD when no adjustments are actively being made. They
cycle between the screen showing the name of the VSC (VSC 500/700/700D) and the screen
that shows the horizontal and vertical frequencies of the input signal, as shown below.
Power
on
Extron
VSC 500
2 sec.
2 sec.
31.46KHz
59.94 Hz
Figure 9. Default menu cycle with input signal
Power
on
Extron
VSC 500
2 sec.
2 sec.
No
Signal
Figure 10. Default menu cycle without input signal
NOTES: From any menu or submenu, after ten seconds of inactivity the VSC will save all
adjustment settings and time out to the default menus.
The main menus are as shown in the following flowcharts. The main menus for the
VSC 500, 700, and 700D are identical except for the additional genlocking menu for the
VSC 700 and 700D. Use the Menu button to scroll between main menus.
Power
on
Extron
VSC 500
Auto Set
NEXT=Go
2 sec.
2 sec.
31.46KHz
59.94 Hz
MENU
MENU
Output
Config
MENU
Filters
MENU
Zoom
MENU
MENU NEXT
Exit
Menu
Power
on
Extron
VSC 700D
Auto Set
NEXT=Go
2 sec.
2 sec.
31.46KHz
59.94 Hz
MENU
MENU
Output
Config
MENU
Filters
MENU
MENU
Zoom
Genlock
MENU
MENU NEXT
Exit
Menu
Figure 11. Main Menus for the VSC 500 Figure 12. Main Menus for the
VSC 700 and 700D
VSC 500/700/700D User Guide • Installation and Operation 11