Extron Electronics VSC 500_700_700D User Guide - Manual (Page 22)

Exit Menu (Exit Menu)
The following flowchart describes the Exit menu. Pressing the Next button from this menu
will return you to the default menu cycle.
Exit
Menu
MENU
NEXT
Zoom Extron
VSC 500
2 sec.
2 sec.
31.46KHz
59.94 Hz
Figure 19. Exit Menu
Additional Functions
In addition to the main menu system, there are several other functions that are featured by
the VSC 500, 700, or 700D. Image sizing, shifting, freezing, a unit reset function, and an
executive mode to disable the front panel controls are also available.
Size Function
Press the Size button at any time to adjust the size of a displayed image.
Hsz 0512
Vsz 0512
Size control
• Increase or decrease the
size of the image horizontally
(default is 512) or vertically
(default is 512)
NOTE: The adjustment range depends
on the output resolution selected.
Figure 20. Size Adjustment
Rotate the horizontal knob ([) and vertical adjustment knob ({) to adjust the horizontal
and vertical dimensions, respectively, of the image. The adjustment setting, which is
displayed in the menu display, varies according to the resolution of the display device. The
defaults are 512 for both the horizontal and vertical size.
The Size LED will light green when the Size button is pressed, and the Min/Max LED will
light red whenever the adjustment range has reached its limit. Pressing the Size button
again returns you to the default menu cycle, and pressing the Next button advances you to
the Shift menu, as described below (see
Front Panel Features in this section).
VSC 500/700/700D User Guide • Installation and Operation 16