Extron Electronics VSC 500_700_700D User Guide - Manual (Page 26)

VSC Infrared Remote Control
The optional VSC IR remote control, shown at right, replicates
all of the front panel controls except the Menu and Next
buttons. If Executive mode has been enabled on the VSC,
input selection and adjustments can still be made from the
remote control or the Windows-based control program
(via an RS-232 device) to configure the video scan converter
(see“
Serial Communication ” for details).
The topmost part of the remote control features the
Horizontal filter buttons, a Freeze On and Off button, and the
Vertical filter buttons.
Select input 1 or 2 via the Inputs buttons.
The middle portion of the VSC remote control features the
Size and Shift buttons.
The bottom portion of the remote control features
Presets 1 - 8. The presets save the input rate, the
output type, sizing, shifting, and filtering information.
After properly setting up an image, press the Store button,
then press a preset button to save the settings to the
selected preset button. To retrieve a preset, press the
desired preset button.
Use the Zoom button to zoom in and zoom out of an image.
NOTE: The presets feature is only available through
the IR remote control. For a detailed description
of the other VSC features and functions that
are accessed by the remote control, see earlier
sections of this chapter.
VSC 500/700/700D User Guide • Installation and Operation 20