Vanguard TRM-20_40 - Manual (Page 80)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
76
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the unit’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the [1] key (ERASE INTERNAL REC). The following screen will be
displayed:
Continue with the steps below.
1. ERASE SINGLE REC.
Press the [1] key (ERASE SINGLE REC.) to erase a single record. The following
screen will be displayed:
Type the record number that you would like to erase, and then press the
[ENTER] key. The following screen will be displayed:
ERASE RECORD
NUMBER:
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
"STOP" TO EXIT
1. ERASE INTERNAL REC
2. ERASE THUMB DRV REC
ERASE RECORD
1. ERASE SINGLE REC.
2. ERASE ALL RECORDS
"STOP" TO EXIT