Vanguard TRM-20_40 - Manual (Page 74)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
70
3.15.5. Copying Test Records to a USB Flash Drive
Use the steps below to copy one or all test records from the unit’s Flash EEPROM to a
connected USB Flash drive:
a. Make sure a USB Flash drive is connected to the unit’s “USB MEM” port, and then start
from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the
[3]
key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
Press the
[5]
key (COPY TO THUMB DRIVE).
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY TO THUMB DRIVE
1. RECORD ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1. RUN TEST
2. SETUP
3. USER DIAGNOSTICS
11/11/11
13:13:15
22 °C 72°F