Vanguard TRM-20_40 - Manual (Page 28)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
24
3.7 Setting the Date and Time
To set the date and time:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP)
b. The following screen will be displayed:
Press the [4] key (SET TIME).
c. The following screen will be displayed:
Type the current date using the keypad. The following screen will be displayed:
Enter the time using the keypad. When the time has been entered, you will be
immediately returned to the “START-UP” menu.
ENTER TIME
HH:MM:SS
_
ENTER DATE
MM-DD-YY
_
1. RECORD ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1. RUN TEST
2. SETUP
3. USER DIAGNOSTICS
11/01/11
09:06:21
22 °C 72°F