Vanguard TRM-20_40 - Manual (Page 68)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
64
3.15.3. Restoring a Test Record From Flash EEPROM
Use the steps below to restore a test record from the TRM’s internal Flash EEPROM to the
working memory:
a. Start from the “START-UP” menu:
Press the [2] key (SETUP).
b. The following screen will be displayed:
Press the [3] key (SAVE/RESTORE RECORD).
c. The following screen will be displayed:
NOTE
Option 5 (COPY TO THUMB DRIVE) will be listed only if a USB Flash drive is
connected to the unit.
Press the [1] key (RESTORE RECORD)
1. RESTORE RECORD
2. SAVE RECORD
3. RECORD DIRECTORY
4. ERASE RECORD
5. COPY TO THUMB DRIVE
1. RECORD ID
2. PRINT RECORD
3. SAVE/RESTORE RECORD
4. SET TIME
5. SET LANGUAGE
1. RUN TEST
2. SETUP
3. USER DIAGNOSTICS
11/09/11
12:13:15
22 °C 72°F