Vanguard TRM-20_40 User Manual

Page 51

REV 1 TRM-20 AND TRM-40 USER’S MANUAL

h. The following screen will be displayed:

Use the

[PAPER ∧ Contrast]

and

[PAPER ∨ Contrast]

keys to adjust the

reference temperature.

Press the

[ENTER]

key to confirm the reference temperature setting.

i. The following warning screen will be displayed:

This warning is a reminder that the next sequence of test steps will run current through
the test load.

Press any key to continue.

j. The following screen will be displayed:

Press the

[START]

key to run the test.

- V1 & V2 TEST -

40 AMP TEST

"START" to RUN TEST

"STOP" TO ABORT

***** WARNING! *****

DANGEROUS FLASH-OVER
WILL OCCUR IF CABLES
ARE DISCONNECTED!
********************

REFERENCE TEMP:

75.0

C 167.0

↑↓

to adjust tk

"ENTER" to accept