Vanguard TRM-20_40 - Manual (Page 36)

TRM-20 AND TRM-40 USER’S MANUAL REV 1
32
n. The following screen will be displayed:
1. YES
Press the [1] key (YES) to save the reading. One of the following screens will be
displayed:
The following screen will be displayed if there is no previous data in the memory:
The following screen will be displayed if previous data for the same test type is
stored in the memory:
The TRM retains the current test results in its working memory. When a test is
finished, the user can append the new test results to the previous test results in
the working memory, as long as the unit’s power has not been turned off
between tests.
Press the [1] key (APPEND PREV. DATA) to append the current test results to the
previous test results in the working memory.
Press the [2] key (CLEAR PREV. DATA) to only save the current test results and
discard any previous data from the working memory.
In either case, press any key and continue to step o.
PREVIOUS DATA IN BUF
11/03/11 14:49:09
1. APPEND PREV. DATA
2. CLEAR PREV. DATA
===
>
TEST SAVED!
<
===
KEEP THIS READING?
1. YES
2. NO