Vanguard TRM-20_40 - Manual (Page 69)

REV 1 TRM-20 AND TRM-40 USER’S MANUAL
65
d. The following screen will be displayed:
NOTE
If you have a USB Flash drive inserted in the unit’s “USB MEM” port, the
following screen will be displayed instead of the above screen:
Press the [1] key (INTERNAL STORAGE).
The following screen will be displayed:
Continue with the steps below.
1. ENTER RECORD NUMBER
Press the [1] key (ENTER RECORD NUMBER) if you know the record number that
you would like to restore. The following screen will be displayed:
Type the record number using the alpha-numeric keypad and then press the
[ENTER] key. The following screen will be displayed:
RESTORE RECORD
NUMBER:
RESTORE RECORD
1. ENTER RECORD NUMBER
2. SCROLL TO SELECT
1. INTERNAL STORAGE
2. THUMB DRIVE
RESTORE RECORD
1. ENTER RECORD NUMBER
2. SCROLL TO SELECT