Teledyne LeCroy Detective - Users Manual - Manual (Page 13)

CATC CATC Detective User’s Manual Version 2.21
Page 10
The installation program modifies the system registry to install the CATC Detective driver.
3.2 Running The Software
The CATC Detective software is a Windows application, and can be run under Windows 3.1,
Windows 95, and Windows NT. To start the program, double-click on the file name (located
with the Explorer or equivalent service), or on the CATC Detective icon created during the
software installation.
The program will start with the main window active.
4. THE CATC DETECTIVE SOFTWARE
4.1 Getting Started
The CATC Detective Bus & Protocol Analyzer continuously monitors all USB activity. At the
operator’s discretion, the analyzer will record a snap shot view of the bus traffic. It will store the
data in a file (initially named “data.usb”) on the system hard drive and display the information on
the screen. Once the information is captured and is displayed, it can be viewed and analyzed
using a variety of tools. The data can be stored permanently, and conveniently viewed on any PC
equipped with the CATC Detective software. A view-only version of the software permits
subsequent viewing without the need for any Detective hardware.
4.2 The Main Display Window
The CATC Detective analyzer’s main display incorporates the following set of Windows pull-
down menus:
•
File
•
Setup
•
Record
•
Report
•
View
•
Decode
•
Search
•
Window
•
Help
Clicking on any of these menus will expand it, offering various function selections. Subsequent
sections of this document describe the operation of each menu item.