Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 84)

Teledyne LeCroy Launching the Configuration Space Editor
84 Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
Figure 6.3: Add Capability Structure
Enter an integer Offset.
Position the structure in the linked list of capabilities by selecting the Previous and Next
capability structures.
Note:
User‐defined structures can be added to the above set of supported structures ( “Configuration
Space Decoding” on page 97 ). The Configuration Space View, from the Reports menu, reflects
any added structures.
After you click OK, the center column displays the Capability Structure View, with the
register layout. You can modify the selected Capability Structure by selecting registers and
editing in binary or hex. The toolbar allows you to select Binary or Hexadecimal for editing.
Figure 6.4: Capability Structure View