Teledyne LeCroy Summit Z3-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 18)

Teledyne LeCroy Environmental Conditions
18 Summit Z3‐16 PCI Express Multi‐Lane Exerciser User Manual
2.3.1 User Interface on the Summit Z3-16 Exerciser
The Summit Z3‐16 bracket contains the following interface components:
 Power On/Off LED
 Power socket for the 12V DC Power Connector
 Power requirement is 100‐240 VAC, 47‐63 Hz universal input for AC Adapter
which is included
 USB Type B Host Machine Connector
 Ethernet port
2.4 Environmental Conditions
The environmental condition specifications are:
 Operating range from 0 to 40C (32 to 104F), 0 to 90% humidity, non‐con‐
densing
 Storage range from ‐10 to 80C (‐4 to 176F)
WARNING: Since the components on the Summit Z3‐16 card are exposed, please handle
the board with care as components could be damaged.
2.4.1 Connectors
USB Type B Host Machine Connector
This connector links the Summit Z3‐16 Exerciser to the host machine for the purpose of
downloading generation scripts and controlling the behavior of the Exerciser.
Note:
Use either USB or Ethernet, not both.
Ethernet Port
A 10/100/1000baseT Ethernet connector to the host machine is provided. GIGE
Connectivity allows connection to an Ethernet network. This connector links an Exerciser
to the host machine for the purpose of downloading generation scripts and controlling
the behavior of the Exerciser.
Note:
Use either USB or Ethernet, not both.
In/Out Connector
This is for future use.
x16 PCIe Edge Connector
The x16 PCIe Edge connector can be adapted to x8, x4 or x1 slots through the use of a
Card Reducer Edge Adapter.