Teledyne LeCroy Summit Z2-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 73)

Summit Z2-16 Exerciser User Manual Chapter 8: Updates and Licensing
Teledyne LeCroy
69
Chapter 8: Updates and Licensing
8.1 Updating the Exerciser
BusEngine™ and/or Firmware updates are now automatic processes that run anytime a
new version of the PETracer™ software is installed that is incompatible with the currently
installed BusEngine or Firmware. The update process generates onscreen instructions.
If, however, you need to manually perform BusEngine or Firmware updates, follow these
steps:
Step 1 Select Setup > Update Device … from the menu to display the
Update Analyzer dialog box for Summit Z2-16™.
Step 2 Select the appropriate file locations for the Firmware and/or BusEngine,
using Browse, if necessary.
Step 3 Check the appropriate options (if in doubt, check all options).
Step 4 Click Update to initiate the updating of the Exerciser.