Teledyne LeCroy Summit Z2-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 57)

Summit Z2-16 Exerciser User Manual Chapter 4: Traffic Generation
Teledyne LeCroy
53
4.8 Generating Traffic: Begin Traffic Generation
To begin traffic generation: 
Step 1 Start generation by clicking the Start Traffic Generation button
on the Status bar.
This action causes the software to download the script to the device. After the
download completes, the device starts executing the script.
As the script executes, the Status bar displays the script's progress.
The Current script position field displays the command description and
CATC Trace packet number currently being generated.
Note: Script execution can be terminated at any time by clicking the 

Stop Generation
button on the toolbar.
If a Wait command is executed where the Display parameter is specified, the
user-defined text is displayed.
If a wait=user script command is executed, the script pauses until you click the 

Resume Generation button
on the toolbar.