Teledyne LeCroy Summit Z2-16 PCI Express Multi-lane Exerciser User Manual - Manual (Page 17)

Summit Z2-16 Exerciser User Manual Chapter 3: Installation
Teledyne LeCroy
13
Chapter 3: Installation
Summit Z2-16™ is a stand-alone system.
You can begin traffic generation after following the steps in this chapter.
3.1 Installing the PETracer Software
PETracer software operates all of Teledyne LeCroy’s PCI Express protocol Analyzer and
Exerciser products:
The PETracer software is installed on a Microsoft ® Windows ® -based host machine and
serves as the interface for the Exerciser and/or Analyzer. An Exerciser enables traffic
generation features.
To install the PETracer software on the host machine:
Step 1 Insert the CD into the CD ROM drive of the PC that controls the
Exerciser. The installation window opens and displays links to the
PETracer software, user manuals, a readme file, and Acrobat Reader.
Step 2 Select Install Software and follow the on-screen instructions.
The PETracer software installs automatically on the host machine’s hard disk.
During installation, all necessary USB drivers are loaded automatically. Drivers
included in the installation are:
• summit.sys: Summit T2-16/Summit Z2-16 driver
Step 3 To start the application, launch the PETracer program from the Start
menu: 
Start > Programs > LeCroy > PETracer > LeCroy PETracer