IAI America RCP3-RA2BR - Manual (Page 39)

33
10. Connection with Controller
10. Connection with Controller
Use IAI’s dedicated controller. For the connection cable between this actuator and the controller, use IAI’s
connection cable.
This chapter explains the wiring method based on single-axis use.
If you wish to change the cable, consult IAI.
Dedicated connection cable
Pulse motor cable: CB-APSEP-MPA***
*) *** indicates the cable length. Up to 20 m can be specified.
Example) 080 = 8 m
IAI’s dedicated connection cable
(Connects the RCP3XX and
dedicated controller)
Dedicated controller
r = 68 mm or more (movable)
r = 34 mm or more (mounted)