Gilderfluke&Co BR-ANA Analog Output Smart/Dumb Brick - Manual (Page 55)

2) Card Reset:
“j5AA5” (card address)
This command will erase the AutoDownload file on the Sd Flash Card on
the Br-ANA. Needless to say, this command is only rarely used in a com-
pleted installation.
3) Card Status:
“i” (card address)
The status screen is a snapshot image of the current status of the Br-
ANA. If you want to update the status information displayed, you must hit the
ʻCard Statusʼ command again.
When the Br-ANA receives this command, it will respond with the follow-
ing:
Status Dump
The Status Dump shows:
a) number of shows in the AutoDownload file
b) number of channels in the AutoDownload file
Gilderfluke & Co.
Br-ANA
v3.10 - copyright 2012 DCM
Shows: 2, Ch: 123 @ ___0, ADL: AutoDownload_Filename
Br-ANA Name @ Serial Address: __0
show #__1 Show_FileName looping @ frame ______38
input A: open
input B: open
input C: open
input D: open
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-ANA Manual / December 18, 2012 10:21 AM / page 55 of 60