Gilderfluke&Co BR-ANA Analog Output Smart/Dumb Brick - Manual (Page 26)

Recent revisions of the DMX-512 standards have included specifications
for running raw DMX-512 signals through standard Cat-5 (or better) ethernet
cables. The recommended pinout is as follows:
Pair Wire # Color Function DMX-512 Pin
Pair 2
1 White / Orange Data 1+ DMX-512 Pin 3
2 Orange Data 1- DMX-512 Pin 2
Pair 3
3 White / Green
no connection no connection
6 Green
Pair 1
4 Blue
5 White / Blue
Pair 4
7 White / Brown
Signal Common DMX-512 Pin 1
8 Brown
Shield Drain
The DMX-512 standard calls out a 5 pin XLR connector or screw termi-
nals for all connections. All card cages will provide either screw terminals or
other appropriate connection for attaching the DMX-512 input and output.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Br-ANA Manual / December 18, 2012 10:21 AM / page 26 of 60