FEC AFC1500 - Manual (Page 2)

*** WARNING ***
All applicable National and local codes must be followed when installing
and operating the equipment detailed in this manual.
FAILURE TO ABIDE BY THESE CODES AND THE SPECIFICATIONS
DESCRIBED IN THIS MANUAL CAN RESULT IN SERIOUS INJURY TO
PERSONNEL AND/OR DAMAGE TO THE EQUIPMENT.
Read this manual carefully before attempting to operate the equipment.
If this System is being operated as a part of a larger system, the larger system should be
clearly marked with the warning information, above. Also, a copy of this notice should be
included in all pertinent operations and maintenance manuals. At a minimum, Controller
Units must be placed in a NEMA 12 / IP52 enclosure. Some type of Air Handling Unit (air
conditioner, heat exchanger, etc.) may also be required.
Be sure to use the recommended circuit breakers with the power supply lines.
Use the power supply voltages recommended in the specifications to prevent possible
personnel injury and equipment damage.
Do not modify this equipment, or the warranty will be void. Please contact FEC INC. if any
special modification is required.
Inspect the equipment for wear and damage at regular intervals.
Specific precautions regarding equipment installation and location have been incorporated
into this manual. Before operating the equipment, verify that countermeasures have been
taken for any adverse conditions that may exist.
Failure to address these conditions prior to operation could result in damage to the
equipment. **
**
**
**
**
**
**
**
**
OPERATOR AND EQUIPMENT SAFETY
THIS EQUIPMENT IS CAPABLE OF HIGH VOLTAGES HAZARDOUS TO HUMAN LIFE.
Turn off and lock-out all voltage sources prior to performing any work on this equipment.
Do not open or remove any covers, even if the Unit is disconnected from the power source.
Only qualified personnel should attempt to modify or repair this product.
There is a possibility of receiving an electrical shock from this equipment, if used improperly.
This System is designed to operate on 200 VAC. Injury or damage could result from using
improper voltage. **
**
**
**
**
**
*** WARNING ***
Any questions regarding the contents of this document or any related matter should be
directed to FEC INC. at (586) 781-2100. Requests may be faxed to FEC INC. Product
Engineering at (586) 781-0044.
Unauthorized reproduction or distribution of this manual is strictly prohibited. Please contact
FEC INC. if you require additional copies.