Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 92)

Operation GC-Pro TCD
Teledyne Analytical Instruments 78
Selecting Serial Number from the Communications Screen produces
another screen which allows the user to input the serial number for the
analyzer which is used by the RS232 when in Profi mode to identify the
analyzer. Use the UP Arrow and then select the ENTER button next to
each channel. The following example screen has the analyzer serial
number set to 473200. The default serial is 100000.
4.5.12.7 D ETECTOR
The GC-Pro TCD Analyzer can be equipped with optional detectors
at the time of purchase. These options include an FID (Flame Ionization
Detector) or SO
2
detector along with the standard TCD detector. If an
optional detector has been installed an accompanying addendum will be
included to describe the operation and maintenance required for that
detector. The DETECTOR function has been set up at the factory for