Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 65)

GC-Pro TCD Operation
Teledyne Analytical Instruments 51
 Sensor
 GC Column
 Sample Chamber
Refer to the Addendum and Testing Results section of Appendix C for
the specific temperature setpoints used for your system and application. Do
not change these values unless directed by Customer Service at TAI. For
further information please contact TAI Customer Service.
Caution: The temperature settings have been carefully
determined and set at the factory for your
application. Temperature is a key factor in
determining the accuracy of the resultant
analysis. It is recommended that the user consult
TAI before making any changes to the
temperature setpoints as listed in Appendix C of
this manual.
To monitor the temperatures, check the status of a thermocouple or
change a temperature controller setpoint select “Temperature” from the
MAIN screen. The following screen will display.
4.5.7.1 T HERMOCOUPLE
Selecting “Thermocouple” from the Temperature menu shows the
actual temperature reading (°C) of the three sections: Sample, Sensor,
and Column.