Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 68)

Operation GC-Pro TCD
Teledyne Analytical Instruments 54
You can adjust any of the three PID constants by touching the data
box and entering a new value into the numerical entry box that pops up.
Once the value has been entered, press ENTER on the entry box to
accept the value and dismiss the numerical entry box. After all
parameters have been set, save the values by pressing ENTER on the
lower left corner of the screen. This will return you to the Temperature
main screen.
4.5.7.4 S TATUS
The STATUS screen displays the status for the three thermocouple
sensors. If a thermocouple is open or damaged, this condition will be
indicated by the message “Broken” in the corresponding sensor column.
Otherwise, if a thermocouple is operating properly “Normal” will be
displayed in the sensor column.