Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 57)

GC-Pro TCD Operation
Teledyne Analytical Instruments 43
CAUTION: STANDBY SHUTS DOWN POWER TO THE DISPLAYS
ONLY. INTERNAL CIRCUITS ARE STILL ENERGIZED
AND ELECTRICAL SHOCK HAZARD STILL EXISTS.
To place the instrument in STANDBY status press the “Standby” button
at the lower left corner of the display. The following Confirmation
screen will pop up.
Selecting ‘OK” puts the system goes into a sleep mode and
following window will be displayed on the screen.
To come out of standby mode, touch the “WAKE UP” button. An
informational pop up screen will appear for approximately one minute
displaying a message “Please wait……”.