Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 51)

GC-Pro TCD Operation
Teledyne Analytical Instruments 37
This screen provides the actual temperatures in the respective
chambers. It is read-only, however once the unit has attained
operating temperature and concluded the initial power up
sequence, this screen can be used to alter the thermal parameters
of the system. See Section 4.5.7.
6. During the warm up period activate the support gases as
described in Section 4.4.
7. Following the warm up, the system will initiate a self-diagnostic
routine and display the results as either “OK” or “Failed”
8. After the self diagnostic test has completed the instrument will
enter the analyze mode and display the analyze screen. See
Section 4.5.13.