Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 89)

GC-Pro TCD Operation
Teledyne Analytical Instruments 75
4.5.12.4 T IME
The date and time are set from the Time screen. Select Time from
the SETTINGS screen.
Touching any of the Date and Time value boxes will bring up a
numerical keypad that allows the date and tie to be input. The time
settings entered in this screen sets the RTC which is interfaced to 9261
board on the I2C interface.
After selecting Time, the following below screen displays:
After entering each value press the “Enter” button on the keypad to
input the number and move to the next field. When all inputs have been
made, press the ENTER button on the display screen and then respond
to the confirmation display that appears.
Pressing “OK” saves the new date and time settings.