Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 73)

GC-Pro TCD Operation
Teledyne Analytical Instruments 59
Pressing GROUP and assigning a specific group to Channel 0, the
screen changes to:
where WAVE function is now available.
Any group that is available (see Section 4.5.8 Group Setup) can be
assigned to any output channel.
To assign a group to a channel: (INFORMATION REQUIRED ON
HOW TO DO THIS)
4.5.10 Calibration
The SPAN function is used to calibrate the analyzer. Span can be
performed either manually or automatically with the auto calibration
function if equipped. Typically, each group will require a separate
calibration.
The analyzer is calibrated using span gas as described in Section
4.4.2. See also Appendix C Addendum and Testing Results for any
specific requirements regarding span gas for your application. This
section assumes that this gas has been properly connected and the line
checked for leaks.
To initiate a span calibration, touch the Calibration icon on the
MAIN screen. The following screen is displayed.