Teledyne GC-Pro/FID - Gas Chromatograph - Manual (Page 90)

Operation GC-Pro FID
Teledyne Analytical Instruments 76
After entering each value press the “Enter” button on the keypad to
input the number and move to the next field. When all inputs have been
made, press the ENTER button on the display screen and then respond
to the confirmation display that appears.
Pressing “OK” saves the new date and time settings.
4.7.12.5 P ASSWORD
There are two functions in the GC-Pro FID that if misused can result
in significant changes to the instrument. These are: Default Settings
from a Cold Boot (Section 4.7.13.5) and Firmware Upgrade. These
functions are therefore password protected functions.
The password is assignable by the user or the default password
“11111” can be used. The password can be any number between 1 and
99999.
To assign a new password, press “Password” from the SETTINGS
screen. The following screen will appear: