Teledyne GC-Pro/FID - Gas Chromatograph - Manual (Page 58)

Operation GC-Pro FID
Teledyne Analytical Instruments 44
 Settings
 Firmware Upgrade
These functions are described in the sections that follow.
4.7.4 Standby
This function allows you to place the instrument in STANDBY
mode.
CAUTION: STANDBY SHUTS DOWN POWER TO THE DISPLAYS
ONLY. INTERNAL CIRCUITS ARE STILL ENERGIZED
AND ELECTRICAL SHOCK HAZARD STILL EXISTS.
To place the instrument in STANDBY status press the “Standby” button
at the lower left corner of the display. The following Confirmation
screen will pop up.
Selecting ‘OK” puts the system goes into a sleep mode and
following window will be displayed on the screen.