Teledyne GC-Pro/FID - Gas Chromatograph - Manual (Page 69)

GC-Pro FID Operation
Teledyne Analytical Instruments 55
4.7.7.4 S TATUS
The STATUS screen displays the status for the three thermocouple
sensors. If a thermocouple is open or damaged, this condition will be
indicated by the message “Broken” in the corresponding sensor column.
Otherwise, if a thermocouple is operating properly “Normal” will be
displayed in the sensor column.
4.7.8 Group Setup
Group Setup assigns to each compound a name, a range given in
Range settings and an associated peak window that is determined in
Timing settings. These values should not be modified unless directed by
TAI customer Service.
When the Group Setup icon on Main Menu is selected, the following
screen is displayed.