Teledyne GC-Pro/FID - Gas Chromatograph User Manual

Page 83

GC-Pro FID

Operation

Teledyne

Analytical

Instruments

After about one minute the results of the self tests are displayed as

“GOOD” or “BAD”. The T1 to T4 tests analyze the 4 thermocouples for
continuity. Once the user enters into this screen there is no option for
stopping the self test in the middle. After performing the self test the
screen automatically reverts back to the self test screen.

4.7.12 Settings

Touching the Settings icon brings up a screen with eight functions

that are used to customize the analyzer to your specific needs. The
functions available are:



ALARMS:

Used to set the alarm setpoints and determine

whether each alarm will be active or defeated, HI or LO
acting, and failsafe or not.



RANGE:

Used to set up three analysis ranges that can be

switched manually.



CHANGE STREAM

: Used to manually switch between

sample and calibration gas.



PASSWORD:

Used to establish password protection or

change the existing password.

 OVERLAY CHROMATOGRAM:


TIME:

Used to set the current date and time on the

instrument.



INSTRUMENT INFORMATION:

Displays Manufacturer,

Model, and Software version of the instrument.

 COMMUNICATION: Selects between four different RS232

protocols.