Teledyne GC-Pro/FID - Gas Chromatograph - Manual (Page 51)

GC-Pro FID Operation
Teledyne Analytical Instruments 37
The GC-Pro FID will automatically attempt a flame ignition
sequence following the warm up period which has been preset at the
factory.
If the ignition process fails, the instrument will attempt to ignite the
flame 4 more times. If it continues to fail after the fifth attempt, a flame
failure message will appear on the display. If this occurs refer to Section
5.
Attempting to reignite the flame by touching the “RE-IGNITE”
button will display a confirmation window as shown below.