Teledyne 3000ZA2G - Zirconium oxide analyzer - Manual (Page 66)

Maintenance 3000ZA2G
Teledyne Analytical Instruments 54
5.3 Fuse Replacement
1. Place small screwdriver in notch, and pry cover off, as shown
in Figure 5-1.
Figure 5-1: Removing Fuse Block from Housing
2. To change between American and European fuses, remove
the single retaining screw then flip the Fuse Block over 180
degrees. Replace the screw.
3. Replace fuse as shown in Figure 5-2.
4. Reassemble housing as shown in Figure 5-1.
American Fuses European Fuses
Figure 5-2: Installing Fuses