Teledyne 3000ZA2G - Zirconium oxide analyzer - Manual (Page 46)

Operation 3000ZA2G
Teledyne Analytical Instruments 34
Note: If you use password security, it is advisable to keep a copy
of the password in a separate, safe location.
4.3.3.1 E NTERING THE P ASSWORD
To install a new password or change a previously installed
password, you must key in and Enter the old password first. If the
default password is in effect, pressing the Enter button will enter the
default TAI password for you.
Press System to enter the System mode.
TRAK/HLD Auto—Cal
PSWD Logout More
Use the ◄►arrow keys to scroll the blinking over to
PSWD , and
press Enter to select the password function. Either the default TAI
password or AAAAA place holders for an existing password will appear
on screen depending on whether or not a password has been previously
installed.
T A I
Enter PWD
or
A A A A A
Enter PWD
The screen prompts you to enter the current password. If you are
not using password protection, press Enter to accept TAI as the default
password. If a password has been previously installed, enter the
password using the ◄►arrow keys to scroll back and forth between
letters, and the ▲/▼ arrow keys to change the letters to the proper
password. Press Enter to enter the password.