Teledyne 3000ZA2G - Zirconium oxide analyzer - Manual (Page 28)

Installation 3000ZA2G
Teledyne Analytical Instruments 16
inside the instrument. The door latch is spring loaded and will swing
open when the button in the center of the latch (upper right corner) is
pressed all the way in with a narrow gauge tool (less than 0.18 inch
wide). Allow clearance for the door to open in a 90-degree arc of radius
7.125 inches. See Figure 3-2.
Figure 3-2: Required Front Door Clearance
3.3 Rear Panel Connections
Figure 3-3 shows the Model 3000ZA2G rear panel. There are ports
for gas, power, and equipment interface. The Zero In and Span In ports
are not included on the standard model but are available as options.
Figure 3-3: Model 3000ZA2G Rear Panel
Ventilation
Power Entry
Module w/ Fuse
Housing RS-232 Port
50-Pin Equipment
Connector
Auto Cal Valves
(optional)
Gas
Connections