Teledyne 3000TA-XLEU - Trace oxygen analyzer - Manual (Page 18)

Introduction 3000TA-XL-EU
Teledyne Analytical Instruments 2
 Advanced Micro-Fuel Cell, designed for trace analysis, has a
0-1 ppm low range with less than a 0.2 ppm offset and six
months warranty and an expected lifetime of one year.
 Versatile analysis over a wide range of applications.
 Microprocessor based electronics: 8-bit CMOS
microprocessor with 32 kB RAM and 128 kB ROM.
 Three user definable output ranges (from 0-1 ppm through 0-
250,000 ppm) allow best match to users process and
equipment.
 Air-calibration range for spanning at 20.9 % (209,000 ppm)
available.
 Auto Ranging allows analyzer to automatically select the
proper preset range for a given measurement. Manual
override allows the user to lock onto a specific range of
interest.
 Two adjustable concentration alarms and a system failure
alarm.
 Extensive self-diagnostic testing, at startup and on demand,
with continuous power-supply monitoring.
 Two way RFI protection.
 RS-232 serial digital port for use with a computer or other
digital communication device.
 Four analog outputs: two for measurement (0–1 V dc and
Isolated 4–20 mA dc) and two for range identification.
 Convenient and versatile, steel, flush-panel or rack-
mountable case with slide-out electronics drawer.
1.4 Model Designations
3000TA-XL:
Standard model for sample under pressure
3000TA-XL-VS: Instrument configured for Vacuum Service
3000TA-XL-CV: Instrument with calibration valves
3000TA-XL-I:
Web enabled version