Teledyne 2010A - Split architecture thermal conductivity analyzer - Manual (Page 12)

Teledyne Analytical Instruments 1- Part
1 Introduction
Model 2010A
• Alarms Set the alarm setpoints and attributes.
• Range Set up the user definable ranges for the instrument.
Data Entry Keys: Six touch-sensitive membrane switches are used to
input data to the instrument via the alphanumeric VFD (Vacuum Fluores-
cent Display) display:
• Left & Right Arrows Select between functions currently
displayed on the VFD screen.
• Up & Down Arrows Increment or decrement values of
functions currently displayed.
• Enter Moves VFD on to the next screen in a series. If none
remains, returns to the Analyze screen.
• Escape Moves VFD back to the previous screen in a series. If
none remains, returns to the Analyze screen.
Digital Meter Display: The meter display is a VFD device that
produces large, bright, 7-segment numbers that are legible in any lighting.
It produces a continuous trace readout from 0-9999 ppm or a continuous
Figure 1-1: Model 010A Front Panel