Luminex 200 System User Manual - Manual (Page 45)

Luminex 200 Maintenance Logs
Month:
Year:
Use this form to record information over a four-week period. Fill in the month(s) and year
above. Fill in the dates in the first line of the table. For each item listed at the left, enter your
initials under each date that you perform the item.
NOTE: Follow your standard laboratory safety practices when cleaning or
maintaining the system. Do not remove the instrument cover under
any circumstances.
TABLE 1. Daily Maintenance
DATES
STARTUP Initials: For each task listed at the left, fill in your initials under each date that you
perform the task.
Laser
warmup
Check sheath
fluid
Check waste
level
Tighten
sheath cap
Prime
Alcohol Flush
(70% either
isopropanol
or ethanol)
Wash twice
with distilled
water
SHUT DOWN Initials: For each task listed at the left, fill in your initials under each date that you
perform the task.
Sanitize (10
to 20%
household
bleach
solution)
Wash twice
with distilled
water
Soak with
distilled water
For In Vitro Diagnostic Use Maintenance and Cleaning
33