Luminex 200 System User Manual - Manual (Page 31)

WARNING: The waste container should not be placed on top of the
instrument. Ensure that the waste tubing is not elevated above
the level of the Luminex 200 analyzer at any point.
Contact Luminex Technical Support before you relocate the waste fluid container. To
maintain a stable flow rate, do not move the waste line or container during system operation.
WARNING: Waste levels must be manually monitored. Do not allow the
waste container to overflow.
Optical
The optical system consists of the optical assembly and the excitation lasers. The optical
assemblies do not require manual adjustment by the user.
xMAP Technology Reagents
The xMAP technology reagent system consists of classification calibration microspheres,
reporter calibration microspheres, classification control microspheres, and reporter control
microspheres.
For In Vitro Diagnostic Use The System
19