Dsbv-d keyboard power setting kbpwr1 – Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual
Page 82
4-6
Chapter 4: Motherboard information
4. Keyboard power (3-pin KBPWR1)
This jumper allows you to enable or disable the keyboard wake-up
feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer
when you press a key on the keyboard (the default is the Space Bar).
This feature requires an ATX power supply that can supply at least 1A
on the +5VSB lead, and a corresponding setting in the BIOS.
5. VGA controller setting (3-pin VGA_EN1)
These jumpers allow you to enable or disable the onboard VGA
controller. Set to pins 1-2 to activate the VGA feature.
DSBV
-D
DSBV-D Keyboard power setting
KBPWR1
(Default)
+5V
+5VSB
3
2
2
1
DSBV
-D
DSBV-D VGA setting
VGA_EN1
1 2
2 3
Enable
(Default)
Disable
This manual is related to the following products: