Asus Pedestal/5U Rackmount Server TS500-E4 Server - Manual (Page 110)

5-16 Chapter 5: BIOS information
5.3.5 IDE Channel 0 Master/Slave; SATA Port
1/2/3/4
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main
Item Specific Help
User = you enter
Paremeters of hard-disk
driver installed at this
connection.
Auto = autotypes hard-disk
drive installed here.
CD-ROM = a CD-ROM drive is
installed here.
ATAPI Removable =
removable disk drive is
installed here.
IDE Channel 0 Master
Type: [Auto]
Multi-Sector Transfers [Disabled]
LBA Mode Control [Disabled]
32-Bit I/O [Disabled]
Transfer Mode [Standard]
Ultra DMA Mode [Disabled]
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic selection
of the appropriate IDE device type. Select [CD-ROM] if you are specifically
configuring a CD-ROM drive. Select [ATAPI Removable] if your device is
either a ZIP, LS-120, or MO drive. Select [User] to manually enter the
parameters of the device. Configuration options: [Auto] [User] [Other
ATAPI] [IDE Removable] [CD-ROM] [ATAPI Removable]
• Except for 32-Bit I/O item, the following items become user
-configurable when the Type item is not set to [Auto].
• For items that have no sub-menu, you have to use -/+ for values
changing.
Multi-Sector Transfers [Disabled]
Enables or disables data multi-sectors transfers. When set to 2~16 Sectors,
the data transfer from and to the device occurs multiple sectors at a time
if the device supports multi-sector transfer feature. When set to [Disabled],
the data transfer from and to the device occurs one sector at a time.
Configuration options: [Disabled] [2 Sectors] [4 Sectors] [8 Sectors] [16
Sectors]r
LBA Mode Control [Disabled]
Enables or disables the LBA mode. Setting to Enabled enables the LBA
mode if the device supports this mode, and if the device was not previously
formatted with LBA mode disabled. Configuration options: [Disabled]
[Enabled]