3 pci configuration, Reset configuration data [no, Plug & play o/s [no – Asus Pedestal/5U Rackmount Server TS500-E4 Server User Manual
Page 117: Palette snooping [disabled
ASUS TS500-E4
5-23
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Select ‘Yes’ if you want
to clear the Extended
System Configuration Data
(ESCD) area.
PCI Configuration
Reset Configuration Data
[No]
Plug & Play OS
[No]
Palette Snooping
[Disabled]
PCI Device, Slot #1
PCI Device, Slot #2
PCI Device, Slot #3
PCI Device, Slot #4
PCI Device, Slot #5
PCI Device, Slot #6
PhoenixBIOS Setup Utility
Advanced
5.4.3 PCI Configuration
This menu shows the PCI configuration settings. Select an item then press
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data
(ESCD) area. Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set
to [Yes] and if you install a Plug and Play operating system, the operating
system configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]